Shenzhen Xintaiming Intelligent Equipment Co., Ltd.

 

1. Fast hydraulic press uses a liquid pressure of 2-20MPA as the power source, and is externally connected to a three-phase AC380V 50HZ or two-phase AC220 60HZ AC power supply
2. Fast hydraulic press uses liquid as the medium to transfer energy, adopts advanced hydraulic circuits for the mother and son cylinders, has low oil temperature, and the idle travel speed is above 150MM/s, while the working speed is below 30MM/s.
3. When the device is in standby mode and moving up and down quickly, the noise level does not exceed 75 decibels
4. Adopting a four column and three plate structure, the vertical accuracy of the movable plate is controlled by four precision guide sleeves, and the parallel accuracy of any point on the lower and upper working surfaces reaches below 0.1MM
5. Fast hydraulic press has a waste gas blowing assembly and a waste material discharge groove is opened in the center of the lower workbench
6. The lower dead center position of the punching machine is generally controlled by pressure switches and position sensors
7. Equipped with automatic counting function, with two control modes: manual and semi-automatic. The pressing upper mold can be manually stopped within any travel range, equipped with an emergency rebound button, and can also be equipped with an infrared hand protection device
8. Pressure, stroke, cutting speed, blowing time, and closing height can be adjusted by customers for easy operation;
9. The hydraulic system is equipped with a built-in oil tank at the bottom, which has a clean and stable appearance
10. The output range of this series of hydraulic machinery is 10tf- 100tf optional (1tf=1000kgf=9.8KN)

 

 

1. High rigidity and precision frame, welded with steel plates, and heat treated to eliminate internal stress in the body to ensure long-term stable operation without deformation of the equipment.
⑵ The load on the structural components is uniform and the rigidity is balanced.

2. Stable and high-precision:
The main components of the equipment, such as the crankshaft, gears, and transmission shaft, have undergone hardening heat treatment and have high wear resistance after grinding, ensuring long-term stable performance and meeting the requirements of high precision and stability.

3. Reliable and safe operation performance:
The reason for easy operation and accurate positioning is due to the use of a clutch/brake combination device that is different from traditional brakes, which has high sensitivity. In addition, the international high-end equipment commonly used dual electromagnetic control valve and overload protection device ensure the accuracy and safety of high-speed movement and stop of the punch slide block.

4. Production automation, labor-saving, and high efficiency.
The punching machine can be equipped with corresponding automatic feeding devices, which have feeding error detection, pre cutting, and pre cutting devices, fully realizing automated production with low cost and high efficiency.

5. Sliding block adjustment mechanism:
The sliding adjustment is divided into manual adjustment and electric adjustment, which is convenient, reliable, safe, and fast, with an accuracy of up to 0.2mm.

6. Innovative and environmentally friendly design.
Adopting advanced technology and design concepts from Japan and Taiwan, it has the advantages of low noise, low energy consumption, and no pollution.

 

 

1. Fast hydraulic press is usually used for rough edge punching and shaping of various aluminum and magnesium alloy die-casting products, as well as whole cutting of plastic products;
2. Suitable for the forming of plastic materials such as sheet metal cutting, stretching, etc.
3. Used for cutting, trimming, deburring, and shaping various metal die castings such as aluminum alloys, magnesium alloys, zinc alloys, etc.
4. Especially suitable for aluminum product edge punching, die-casting water mouth punching, mobile phone shell shaping, mobile phone silicone button edge trimming, silicon steel sheet leveling, plastic, rubber product burr treatment, etc., such as various automotive component die-casting products, hardware tools, motor casings, household appliances and other die-casting edge shaping processing technology.

 

 

https://www.xtm-hydraulic-press.com/